Operational Conditions; Software (Operation System); Hardware; Disclaimer - Toshiba Bar Code Printer Network Tool Operation Manual

Operational Conditions

The Product can be used under the following system and environmental requirements.

Software (Operation System)

English operation systems of:
Windows 98, Windows Me, Windows 2000, Windows XP
Although operations have been evaluated under the above operation systems, it is recommended to use the
Product under Windows 2000 or Windows XP.
For Windows 98/Me, please use the Product under the recommended hardware conditions described below.

Hardware

A DOS/V (IBM AT compatible) machine must be used under the above Windows operation system and
mandatory or recommended conditions explained in the table below.
Intel® Pentium® II 400 MHz or higher
CPU
Memory 64 MB or more
HDD Free space of 10 MB or more
FDD 3.5-inch FDD

Disclaimer

The Product allows the Administrator/User to monitor printer statuses, check/change printer setting, and
download a setting file on the computer monitor for the Supported Printers. When an invalid setting is
made for the Supported Printers using the Product, they may malfunction and may not be used
afterwards.
The Product is intended to be used by the Administrator who is familiar with the internal setting of the
Supported Printers and general-purpose printers. The Setting Tool and Downloader must be used by
the Administrator or under instructions of the Administrator.
TOSHIBA TEC shall not be liable for any outcome resulted from a failure to follow the above instructions
(both the Product and the Supported Printers).
Mandatory Conditions Recommended Conditions
Intel® Pentium® III 1 GHz or higher
256 MB or more
7