Toshiba Bar Code Printer Network Tool Operation Manual page 42

Icon Status Name
SUPPORTED PRINTERS
Ribbon error
Printers other than SUPPORTED PRINTERS (including TOSHIBA TEC printers)
Unknown/Off-line
Online/
Printing/
Warm-up
Printer error
No paper
Toner empty
Cover open
Paper jam
LCD Message
Display
Ribbon error is occurring.
Several causes can be thought of.
matter with reference to 'Error Message' in Owner's
Manual.
• Ribbon has run out. (B-SA4T and B-852 series)
RIBBON ERROR • Ribbon is cut.
• Ribbon motor sensor is broken.
Printer is not connected or recognized.
*******
Printer is being monitored properly.
*******
Error is occurring in printer. Check the printer.
*******
Paper has run out. Please load paper.
*******
Amount of paper is very low. Add paper.
*******
(This icon is displayed with other icon.)
Toner has run out. Supply toner.
*******
The remaining amount of toner is very low.
Prepare for a new toner.
*******
(This icon is displayed with other icon.)
Cover is open. Close the cover.
*******
Paper jam is occurring. Remove the paper.
*******
Error requiring a service call is occurring.
*******
42
Description
Set a new ribbon. Pressing the [RESTART] key
continues to print.
Glue both ends where the ribbon was cut and set
it again. Pressing the [RESTART] key continues
to print.
If a ribbon error repeats, the ribbon motor sensor
may be broken. Turn the power off and contact
your local service station.
Handle the