Toshiba Bar Code Printer Network Tool Operation Manual page 32

Management Options (Effective only in Administrator mode)
On the List View screen, click: [Property] – [Management
Options], or right-click the icon in the task tray, then select
[Property] – [Management Options].
Options] screen shown in the right side appears.
[Start TECNet Admin at the startup of the operating
system]
Starts the Surveillance Tool at the startup of the
computer.
[Display the list at the startup of TECNet Admin.]
Starts the Surveillance Tool and displays a task icon,
then the List View screen.
[Use password to log in]
Displays the [Log in] screen at the startup of the Surveillance Tool to identify the Administrator from the
User. When it is checked, the [Password...] button will become effective.
[Password...]
Displays the [Password Change] screen.
[Community...]
Displays the [Community Property] screen.
[OK]
Saves the current setting and exits. New setting becomes effective from a next operation.
[Cancel]
Exits without saving the current setting.
Password Change
A password for the Administrator to log in is specified.
When the password is set for the first time, no password is
required in the [Old Password] entry box. To specify the
password, up to 16 one-byte alphanumeric characters can
be used (Password is not case-sensitive.)
[Old Password]
Shows each input character with the asterisk character.
When the password is specified at the first time, you do
not have to enter it.
Product was just installed.)
[New Password]
Shows each input character with the asterisk characters.
[Confirm New Password]
Shows each input character with the asterisk character.
[OK]
Changes a password and exits.
[Cancel]
Exits without changing the password.
Community Property
Sets community used for sending/receiving packets for
SNMP at the computer side.
[Read Community]
Fixed to public. Do not change.
[Write Community]
Fixed to public. Do not change.
[OK]
Sets a community name shown and exits.
[Cancel]
Exits without changing community.
The [Management
(Password is not set when the
32
'Starting from [Login] Screen'
'Password Change'
'Community Property'