Screens Displayed And Used By This Feature; Screens Displayed And Used By This Feature; [Obtaining Printer Information] Screen; [Printer Selection] Screen - Toshiba Bar Code Printer Network Tool Operation Manual

Screens Displayed and Used by This Feature

This section explains each screen.

[Obtaining printer information] Screen

This screen appears while the printer is obtaining printer
information.

[Printer Selection] Screen

This screen appears when the downloader is started alone or
when no printer information has been recorded.
You will list a printer by clicking [Printer Search] or

[Add Printer...].

When the printer is searched and added, the right figure
appears. If a printer you want to use is not on the list, please
list the printer by clicking [Printer Search] or [Add Printer].
When several printers are on the list, you can select a printer
using the search function at the bottom of the screen.
[Add Printer...] Screen
This screen appears when you click [Add Printer] on the

[Printer Selection] screen.

Available connection: LAN, COM (serial port), LPT, or USB
Items to be set for each connection
LAN : IP address
COM : Transmission speed, data length, parity,
stop bit
LPT, USB : None
(The right figure is for the case when LAN is selected.)
Note: If you are using the Supported Printers without using the
printer driver, the printer driver installation screen appears
when the Supported Printers are connected to a
computer via USB.
In such case, please install the printer driver following the
instructions on the screen.
65