Setting Screens Of Printer Monitor - Toshiba Bar Code Printer Network Tool Operation Manual

Setting Screens of Printer Monitor

Remote Key (Effective only for Supported Printers)
Remotely performs feed, restart, pause, and reset for the
printer. Checks a printer status using the LCD message
display.
Note: LCD message display is shown only in English.
For the LCD Message Display, refer to
'Icons Used for Printer Image and LCD Message Display'.
[FEED]
Same operation as when the printer's FEED key is pressed.
[RESTART]
Same operation as when the printer's RESTART key is
pressed.
[PAUSE]
Same operation as when the printer's PAUSE key is pressed.
[Reset]
Resets the printer. (Same operation as when the power is turned off and on)
[Close]
Closes the Remote Key screen and updates the printer monitor.
Management Info Property (Effective only in Administrator mode)
Specifies management information for the printer.
Note that items displayed for the Supported Printers differ from those for other printers (including other
TOSHIBA TEC printers).
Note: On the [Management Info Property] screen, only one-byte alphanumeric characters and symbols can be
used. Two-byte characters (Hiragana, Katakana, alphanumeric characters, symbols) and one-byte
Katakana cannot be used.
Management Info Property
[ID Number], [Administrator], and [Comment] cannot be
set for printers other than the Supported Printers
(including other TOSHIBA TEC printers).
Printer Name
A printer name is entered, with which printer setting
information is obtained/changed when the [Printer
Monitor] screen is displayed.
(Up to 255 characters)
Location
A location is entered, with which printer setting
information is obtained/changed when the [Printer
Monitor] screen is displayed.
(Up to 255 characters)
ID Number
A serial number is entered, with which printer setting
information is obtained/changed when the [Printer
Monitor] screen is displayed.
(Up to 16 characters)
Administrator
A name of the Administrator is entered, with which
printer setting information is obtained/changed when
the [Printer Monitor] screen is displayed.
(Up to 64 characters)
Contact
A contact is entered, with which printer setting
information is obtained/changed when the [Printer
Monitor] screen is displayed.
(Up to 255 characters)
(Other printers
(including TOSHIBA TEC printers))
44
(Supported Printers)