Each Setting Screen Of List View - Toshiba Bar Code Printer Network Tool Operation Manual

Each Setting Screen of List View

Group Properties
Makes setting for groups to be displayed in the Printer List.
Up to 10 groups can be displayed.
[Group Name]
A group name is entered. (Up to 32 characters)
[Model]
Filter conditions on a printer model are entered using a
comma to separate each condition.
(Up to 256 characters)
Setting can also be made using the [Filter Property] screen.
[Port]
Filter conditions on an address are entered.
When the fourth segment of an IP address is 255 (broadcast) as an effective host address, filters
addresses within a specified subnet.
For example: XXX.XXX.XXX.255
IP addresses from XXX.XXX.XXX.1 to XXX.XXX.XXX.254 are displayed on the Printer List.
[Location]
Filter conditions on a location are entered using a comma to separate each condition.
(Up to 256 characters) Setting can also be made using the [Filter Property] screen.
[ID Number]
Filter conditions on an ID number are entered: develop number in the left box and complete number in the
right box. (Up to 16 characters)
[Administrator]
Filter conditions on the Administrator are entered using a comma to separate each condition.
(Up to 256 characters) Setting can also be made using the [Filter Property] screen.
[Comment]
Filter conditions on a comment are entered using a comma to separate each condition.
(Up to 256 characters) Setting can also be made using the [Filter Property] screen.
[OK]
Adds a new group with filter conditions and exits from the [Group Properties] screen.
[Cancel]
Exits without saving the current setting.
Search
Clicking [Device] – [Search] starts searching printers which
can be displayed on the Printer List.
Clicking [Cancel] stops searching.
changed in the [Search Options] screen.
'By Using Search Function'
'Search Options (Effective only in Administrator mode)'
Search time can be
30