Speed Dialling; Using D O Not Disturb (Dnd) - Polycom IP 550 User Manual

To disable call forwarding - type A:
1. from the idle screen, press
2. dial "0"
3. press OK
or - type B (if more than one line is configured):
1. select the key corresponding to the line for wich you to disable call forwarding
2. dial 999 followed by 0 (e.g.: 9990 to disable call forwarding on the selected line)
3. press
OK
A voice message confirms that call forwarding is disabled
If multiple lines are configured on your phone, you will select type A if you wish to forward calls
addressed to the main line only; you should select type B if you wish to redirect phone calls
addressed to the second line.
When call forwarding has been completed successfully, a call forward icon
number to whom the call has been forwarded to, will appear on your phone display (the icon may
appear with up to 30 seconds delay)
S D
PEED IALLING
To quickly dial a contact, use the contact's speed dial index number, or press the contact's speed
dial key
Using a speed dial index number:
Press the Up arrow , and then enter the contact's speed dial index number
•
To add or edit a speed dial index number for a contact see the section Updating Contact Directory
Using a speed dial key:
press the desired contact's speed dial key (line key) on the top-left of the phone
•
To assign a speed dial key, press and hold an unassigned line key. Then enter the contact
information and press the soft key
U D N D
SING O OT ISTURB
To enable/disable Do Not Disturb (DND)
press the soft key
•
or
press
•
If multiple lines are configured on your phone, DND can be enabled just on selected lines or on all
lines:
press or
DND
•
lines
Go to Table of Content
Forward
Save
(DND)
DND
then
Set All
or to enable or disable DND on all
Clear All
, followed by the
7 / 11