In The Netware 4.X/5.X/6 Print Server Mode (Nds) - Konica Minolta bizhub C360 User Manual

5.7 Printing (Netware)

In the NetWare 4.x/5.x/6 Print Server mode (NDS)

0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select [Print Services Quick
Setup (non-NDPS)] from the Tools menu.
4
Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the
[Type] of the printer to [Other/Unknown] and click [Create].
Then, configure the following settings in [NetWare Setting].
Item
[IPX Setting]
[Ethernet Frame
Type]
[NetWare Print
Mode]
[Print Server Name]
[Print Server Pass-
word]
[Polling Interval]
[Bindery/NDS Set-
ting]
[NDS Context
Name]
[NDS Tree Name]
bizhub C360/C280/C220 (Version 4)
Description
Select [ON].
Select a frame type to be used.
Select [PServer].
Enter a print server name to be operated as Pserver (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .).
Enter a print server password if necessary (up to 63 char-
acters).
Set a job inquiry interval.
Select [NDS].
Enter an NDS context name for print server connection (up
to 191 characters, excluding / \ :; , * [ ] < > | + = ?).
Enter an NDS tree name for print server connection (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .).
5
Prior check
Frame type
The print server
name specified in
Step 4
5-17