Konica Minolta bizhub C360 User Manual page 135

7.1 Restricting users of this machine (MFP authentication)
Reference
- You cannot register a password less than eight characters when [Security Settings]ö[Security De-
tails]ö[Password Rules] is set to [Enable] in the [Administrator Settings] on the Control Panel. If a user
password containing less than eight characters has already been registered, change the password so
that it contains eight characters before setting [Password Rules] to [Enable].
- If you permit the public user access, you can configure the Function Permission and Limiting Access
to Destinations settings for the public user. For details, refer to page 8-41.
- By default, the sheets printed in the single color or 2 color mode are counted as being printed in color.
To restrict use of the color printing or color image transmission functions, you can change this behavior
to treat printing in the single color or 2 color mode as monochrome printing if necessary. For details,
refer to page 10-41.
- Whether to allow the [Save to External Memory] function can be specified when [Save Document] is set
to [ON] in [System Settings]ö[User Box Settings]ö[External Memory Function Settings]. Whether to
allow the [External Memory Document Scan] function can be specified when [USB to User Box] is set
to [ON] in [External Memory Function Settings]. For details, refer to page 12-8.
- When [Security Settings]ö[Security Details]ö[Manual Destination Input] is set to [Restrict] in [Admin-
istrator Settings] on the Control Panel, the user cannot manually enter the address regardless of the
setting of this function.
- To connect this machine to a cellular phone or PDA, install the optional Local Interface Kit EK-605 in
this machine. Whether to allow the [Mobile/PDA] function can be specified when [Bluetooth] is set to
[Enable] in [Network]ö[Bluetooth Setting] and [Bluetooth Print Settings] is set to [ON] in [System Set-
tings]ö[System Connection Setting].
- Whether to allow the [Biometric/IC Card Information Registration] function can be specified when [Bio-
metric/IC Card Information Registration] is set to [Allow] in [Security]ö[Restrict User Access] while the
optional authentication unit is installed.
bizhub C360/C280/C220 (Version 4)
7
7-9