Using Web Services To Establish Ssl Communication From This Machine To A Computer; Tcp/Ip Settings]; Web Service Common Settings] - Konica Minolta bizhub C360 User Manual

8

Using Web services to establish SSL communication from this machine to a computer

8.7 Using Web services to establish SSL communication from this
machine to a computer
Configure settings to use the encrypted SSL communication from this machine to a computer running on the
Windows Vista/7/Server 2008/Server 2008 R2 in a Web services environment. Security of Web services com-
munication can be enhanced using the SSL protocol encryption.
When you configure the SSL communication settings, check the following points.
- To use the encrypted SSL communication between this machine and the computer, you must set the
bidirectional SSL communication between them. For details on configuring settings to establish SSL
communication from Windows Vista/7/Server 2008/Server 2008 R2 to this machine, refer to page 8-21.
- Create a certificate at the computer first, and then associate the TCP/IP communication port (the de-
fault port number is 5358).
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
8.7.1

[TCP/IP Settings]

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-3.
8.7.2

[Web Service Common Settings]

In the administrator mode of PageScope Web Connection, select [Network] ö [Web Service Settings] ö
[Web Service Common Settings].
Item
[Friendly Name]
[SSL Setting]
[Publication Serv-
ice]
[Certificate Verifi-
cation Level Set-
tings]
[Validity Period]
[Key Usage]
[Chain]
[Expiration Date
Confirmation]
8-22
[TCP/IP Settings]
[Web Service Common Set-
Description
Enter a Friendly Name (up to 62 characters).
Select [ON].
If you use this machine in an environment where NetBIOS
is disabled or only the IPv6 protocol communication is
used by the Windows Vista or Server 2008 system, set this
item to [Enable].
The Publication Service function can detect up to 512
destinations, including those detected with the NetBIOS
service.
To verify the certificate, configure settings to verify the
certificate.
Select whether to check that the target certificate is within
the validity period.
Select whether to check that the certificate is used ac-
cording to the purpose approved by the issuer.
Select whether to check that the certificate chain (certifi-
cation path) is correct.
The chain is validated by referencing the external certifi-
cates managed on this machine. For details, refer to
page 8-35.
Select whether to check that the target certificate is within
the validity period.
The OCSP service and CRL (Certificate Revocation List)
are checked in this order when the expiration date of the
certificate is checked.
tings]
Finish
bizhub C360/C280/C220 (Version 4)
8.7
Prior check