Device Certificate Setting]; Protocol Setting] - Konica Minolta bizhub C360 User Manual

8.2 Using device certificates depending on protocol
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d
Reference
When not using device certificates depending on protocols, specify the device certificate shown in [Default]
of [Device Certificate Setting]. For details, refer to page 8-3.
8.2.1

[Device Certificate Setting]

Register a device certificate.
For details, refer to page 8-3.
8.2.2

[Protocol Setting]

In the administrator mode of PageScope Web Connection, select [Security] ö [PKI Settings] ö [Protocol
Setting].
Reference
- The function that uses device certificates depending on protocols is not available when a device certif-
icate is not registered or is only in the certificate signing request state.
Item
[Protocol 1]/[Proto-
col 2]
[Create]
[Delete]
bizhub C360/C280/C220 (Version 4)
[Device Certificate Setting]
[Protocol Setting]
Description
Displays the classification for each protocol.
If the target device certificate is registered, the protocol is
marked by "*".
Select the protocol to specify a device certificate, and
click [Create]. The device certificate registration page ap-
pears, and you can specify the target device certificate.
If the device certificate is already registered, [Edit] ap-
pears. Clicking [Edit] enables you to change the target de-
vice certificate or confirm the details of a device
certificate.
If the target device certificate is registered, click this but-
ton to delete the registered information.
Finish
8
Prior check
8-11