Air Circulation; Moving The Projector - Sanyo PJLink PLC-WXU30K Owner's Manual

Air Circulation

Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3' (1 m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause
fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans' running speed is changed according to the
temperature inside the projector.
Exhaust Vent
Air Intake Vent
(Hot air exhaust)
Air Intake Vent
Air Intake
Vent

Moving the Projector

When moving the projector, replace the lens cover and
retract adjustable feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period,
put it into the supplied carrying case with the lens side up.
CAUTION
The carrying case (supplied) is intended for protection
against dust and scratches on surface of the cabinet, and
it is not designed to protect an appliance from external
forces. Do not transport the projector by courier or any
other transport service with this case, otherwise the
projector can be damaged. When handling the projector,
do not drop, bump, subject it to strong forces, or put other
things on the cabinet.
CAUTION IN CARRyING OR TRANSPORTING
THE PROjECTOR
– Do not drop or bump the projector, otherwise damages
or malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
– Do not put the projector in a case before the projector is
cooled enough.
Safety Instructions
7