Ptz Setup - iCanTek iCanView 240 User Manual

iCanView240/250 User's Guide

5.9. PTZ Setup

Sub Field
Field/Button
/Button
Channel
Selection
PTZ Model
Selection
Delete Button
PTZ Device ID
PTZ Operation
Check
PTZ Position
Setup
Fig. 5-12 PTZ Setup
Not applicable
Choose the PTZ model.
Choose default model for proper operation.
Press this button to delete the setup of PTZ
Your PTZ device needs an ID, input ID in this field.
Click on SAVE to save the ID.
You can check the various operation of the PTZ devices.
"Left"/"Right"/"UP"/"DOWN" ,
"AUTO FOCUS"/"ZIN"/"ZOUT"
You can set up the PTZ limitation & preset positions if the PTZ device
supports it.
Description
Rev.1.0 (Dec.2006) 43