Wireless Configuration (This Is Not Applicable To Icanview240/250 Network Camera) - iCanTek iCanView 240 User Manual

iCanView240/250 User's Guide

5.4. Wireless Configuration (This is not applicable to iCanView240/250 network camera)

For the case of a network camera having built in wireless LAN it is needed to set up wireless LAN configuration
parameters. Click "Wireless Configuration".
Sub Field
Field/Button
Wireless LAN
WLAN Mode
Setup
WLAN Radio
Authentication
Encryption
Fig. 5-5 Wireless Configuration
/Button
Select "ESS" to use wireless interface. If "Disable" is selected, Ethernet
interface is used instead of wireless LAN interface.
Select the mode of Wireless Radio.
Enter the ID of the wireless LAN access point to be connected when
SSID
wireless LAN interface is selected.
Select the type of authentication.
Select the mode of encryption. If encryption is not needed, select "OFF"
Key Set the value of encryption key or pre-shared key.
Description
Rev.1.0 (Dec.2006) 32