4.4
Using the Web service
4.4
Using the Web service
Allows you to command scan operations from the computer (Windows Vista/7/Server 2008/Server 2008 R2)
on the network, and scan data for a purpose and send it to the computer. The following explains the preset-
ting required for the computer.
4.4.1
Settings required to use the Web service
The following settings are required to use the Web service.
-
Installing the driver program of this machine to a computer
-
Configuring settings to use the Web service on this machine
Reference
-
The Web service settings on this machine are configured in Administrator Settings. For details, refer to
the [User's Guide Network Administrator].
4.4.2
Installing the driver program of this machine to a computer
Check before installation
Before installing the driver program, make sure [Network discovery] is turned on in [Control Panel] - [Network
and Sharing Center].
Installation procedure
1
From the [Start] button, select [Network].
Devices connected to the network appear.
2
Right-click the scanner icon representing this machine, and select [Install].
% Depending on the settings on the computer, the UAC (User Account Control) dialog box may ap-
pear. Check the details, and continue.
% If both of the scan and printer functions of the Web service are enabled on the machine, the machine
is represented by the printer icon.
% The driver software is automatically installed. When the confirmation dialog box appear, click
[Close].
3
Select [Direct Input] - [Web Service] on the control panel of this machine, to ensure that the connection
to the computer is established.
bizhub C360/C280/C220 (Version 4)
4
4-7