11.5.10 Setting For Each Purpose - Konica Minolta bizhub C360 User Manual

11
Item
[Header/Footer
Position]
[Line Parameter
Setting]
[TX/RX Settings]
[Function Setting]
[PBX Connection
Setting]
[Report Settings]
[Multi Line Set-
tings]
[Network Fax Set-
ting]
[Header Informa-
tion]

11.5.10 Setting for each purpose

For an item with multiple settings required, configure them according to the instructions shown in the win-
dow.
The available setting items are as follows.
- Configure the settings for sending a scanned document
- Configure the network print settings
- Restrict users using this machine
Reference
- As the setting procedure proceeds, its progress flow is displayed on the left.
- If setting is cancelled, you will return to the Setting for each purpose screen after the items that were
configured before cancellation have been applied
11-30
Description
Configure the setting to print the sender or receiving information.
Specify the fax line such as Dialing Method.
Configure the paper, User Box, and other settings for sending or receiving data.
Configure the fax settings for Memory RX or Network Fax.
Specify the outside line at PBX connection.
Configure the setting for a report, for example, Activity Report, to be output when
sending or receiving data.
Specify the parameters and functions of the extended line.
• This item is displayed when a line is extended.
Configure the setting to use network fax.
Registers sender information and fax number when sending data.
Administrator Mode Overview
bizhub C360/C280/C220 (Version 4)
11.5