Using The Web Service Connection For Installation; Web Service; Operations Required To Use This Function (For Administrators); Installation Methods - Konica Minolta bizhub 226 User Manual

10.2 Manually Installing the Printer Driver (for Windows)
15
Remove the DVD-ROM from the DVD-ROM drive.
Installation of the printer driver is then completed. Once the settings for the printer have been config-
ured, you can use the printer in the same way as a general local printer.
10.2.4

Using the Web service connection for installation

Web service

The Web service function automatically detects devices on the network and installs the necessary printer
drivers.

Operations required to use this function (for administrators)

To use the Web service print, you must configure the network settings for the machine in advance.
Items to be configured
IP address
Web Service Settings
d
Reference
For details on the network settings of this machine, refer to "Network settings" and Web Connection - [Net-
work] - [WSD Configuration] of [User's Guide Network Administrator].

Installation methods

0 Administrator privileges are required to perform this task.
0 To install a different printer driver on the computer where one has already been installed, you must un-
install the whole package of the currently installed printer driver. For details, refer to page 3-4.
1
Install the printer driver for this machine.
% Install the printer driver using the installer or Add Printer Wizard.
The printer driver can be installed in any port.
For details, refer to page 10-4.
2
Turn on the power of the machine while it is connected to the network.
3
In [Network and Sharing Center] on the computer, check that [Network Discovery] is enabled.
4
Open the [Network] window.
% In Windows 8/8.1/Server 2012/Server 2012 R2, open [Control Panel], select the [Network and Inter-
net] category, then click [View network computers and devices].
% In Windows 7/Server 2008 R2, open [Computer] and click [Network].
If [Network] is not displayed, click the [Network and Internet] category on [Control Panel], then click
[View network computers and devices].
% In Windows Vista/Server 2008, open the Start menu, and click [Network].
Connected computers and devices are detected.
5
Select the device name of the machine, then click [Install] on the toolbar.
% In Windows 8/8.1/Server 2012/Server 2012 R2, click [Network] - [Add devices and printers] on the
toolbar. In the displayed window, select the device name of this machine, then click [Next].
The printer driver for this machine is detected and the machine is ready to print.
6
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] or [Devices and Printers] window.
bizhub 226
Description
In [NETWORK SETTING] on the Control Panel of this machine, spec-
ify the IP address.
In [WSD Configuration], enable [Use WSD Browsing].
10
10-11