Faulty Relay That Gives Power To The Heating Element - Electrolux washing machine Service Manual

Faulty Relay that gives power to the heating element.

E66
Checks to do:
Unplug the connector W1-W2 and
measure directly on the main board, you
should find an open circuit.
Is it OK?
YES
Measure between J2-5 and the body of
the machine. Do you measure any
dispersion?
YES
Unplug all the connectors from the drying
heating elements and measure directly
between the component and the body of
the machine. Do you measure any
dispersion?
YES
Change the drying heating element and
run again the diagnostic cycle to verify
any further possible alarm.
SSD-P APdV, EB, HD 01/05
ALARM CODES
Incongruity between anti-boil switch 2 and status of the relay.
Change the Main board and run again
NO
the diagnostic cycle to verify any further
NO
Change the Main board and run again
the diagnostic cycle to verify any further
NO
Change/Check the cable and run again
the diagnostic cycle to verify any further
If there are burn marks on
electronic board, see page 13.1-2
8.28
possible alarm.
possible alarm.
possible alarm.
599 34 71-47