The Sensing Of Door Lock Device On The Electronic Board Is Not Working Properly; The Sensing Of The Component (Triac) That Commands The Door Lock Device On The Electronic Board In Not Working Properly - Electrolux washing machine Service Manual

E44
Checks to do:
The sensing of the component (triac) that commands the door lock device
E45
on the electronic board in not working properly.
Checks to do:
SSD-P APdV, EB, HD 01/05
ALARM CODES
The sensing of door lock device on the electronic board
is not working properly.
Change the Electronic board and
run again the diagnostic cycle to
verify any further possible alarm.
Change the Electronic board and
run again the diagnostic cycle to
verify any further possible alarm.
If there are burn marks on
electronic board, see page 13.1-2
8.19
599 34 71-47