Configuration Code; Table Of Cycle Phase Leds - Electrolux washing machine Service Manual

The configuration code (16 alphanumeric digits) is shown on a
label affixed to the casing of the main PCB and in the Service
Notes describing the various models.
It is advisable to note the configuration code on the casing of the
new PCB fitted to the washing machine.
A = The first digit shown on the display (if featured) indicates the
position of the value to be entered.
On models not fitted with a display window, the same
information is displayed in binary format on the first four
washing phase LEDs.
(the first position displayed is "0").
B =The last digit on the display (if featured) indicates the value of
the configuration character to be entered in a given position.
On models not fitted with a display window, the same
information is displayed in binary format on the second set of
four washing phase LEDs.
EXAMPLES OF CONFIGURATION CODE
A2A7808080E691F2

Configuration code:

POSITION: 0
↓
VALUE: A

TABLE OF CYCLE PHASE LEDS

On models not featuring the display window, it is advisable, before beginning the configuration procedure, to
convert the digits of the configuration code into binary format. To do this, prepare a table of the values to be
entered, which will be displayed by the second group (B) of washing phase LEDs (the positions, indicated by the
first group of 4 LEDs, are not modified).
0 1 2
❍ ❍ ❍
❍ ❍ ❍
❍ ❍ G
❍ G ❍
❍ ❍ ❍
❍ ❍ ❍
❍ ❍ ❍
❍ ❍ ❍
SSD-P APdV, EB, HD 01/05
CONFIGURATION CODE
1 2 3 4 5
↓ ↓ ↓ ↓ ↓
2 A 7 8 0
3 4 5 6
❍ ❍ ❍ ❍ ❍
❍ G G G G
G ❍ ❍ G G
G ❍ G ❍ G
❍ ❍ ❍ ❍ ❍
❍ ❍ ❍ ❍ ❍
❍ ❍ ❍ ❍ ❍
❍ ❍ ❍ ❍ ❍
6 7 8 9 10
↓ ↓ ↓ ↓
8 0 8 0
7 8 9 10 11
A b
G G G G
❍ ❍ ❍ ❍
❍ ❍ G G
❍ G ❍ G
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
10.1
11 12 13 14
(A) (B) (C) (D) (E)
↓ ↓ ↓ ↓
E 6 9 1
12 13 14 15
C d E F
G G G G
G G G G
❍ ❍ G G
❍ G ❍ G
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
15
(F)
↓ ↓
F 2
8
4
2
1
8
4
2
1
599 34 71-47