Advertisement
Step 18: Attach Canopy to Fort
A: Place Canopy over (OR11) Roof Ridge making sure bottom edges of tarp are even on both sides of assembly.
The sun on the tarp should face the front of the fort. (fig. 18.1)
B: Secure one side by attaching Canopy to 1 (OR12) Tarp Front Back using 5 (S5) #8 x 1/2" Pan Screws (with #8
flat washer). (fig. 18.1 & 18.2)
C: Make sure the tarp is taut and then secure opposite end of Canopy to (OR12) Tarp Front Back on the opposite
side of the assembly using 5 (S5) #8 x 1/2" Pan Screws (with #8 flat washer). (fig. 18.1 & 18.2)
D: Attach tarp to each end of (OR11) Roof Ridge using 2 (S5) #8 x 1/2" Pan Screws (with #8 flat washer). (fig.
18.1)
Fig. 18.2
Canopy end is
halfway down
S5
x 5
Sun faces front
OR12
Fig. 18.1
S5
Hardware
12 x
# 8 x 1/2" Pan Screw (with #8 flat washer)
S5
32
S5
x 5
OR11
Other Parts
1 x
OR12
Canopy
Advertisement
