Advertisement
Step 16: Wall Assembly
If you purchased a Selwood Spiral Wave Slide, Selwood Monkey Ladder or
Oriana Pavillion refer to that manual.
Hex Bolt Assembly
Lock
Washer
Flat
He x
Washer
Bolt
A: Attach (OR14) Side Roof to each (F13) Post with 2 (H2) 1/4 x 2" Hex Bolts (with lock washer, flat washer and
t-nut) as shown in fig. 16.1.
B: Below (OR14) Side Roof attach (F14) Wall Support to each (F13) Post with 2 (H2) 1/4 x 2" Hex Bolts (with lock
washer, flat washer and t-nut) as shown in fig. 16.1.
C: On (OR14) Side Roof and (F14) Wall Support in the holes shown in fig. 16.1 install 1 (PB1) 1/4 x 3/4" Pan
Bolt (with lock washer, flat washer and t-nut) in each board and 2 (PB1) 1/4 x 3/4" Pan Bolt (with lock washer, flat
washer and t-nut) in (F17) End Floor.
Fig. 16.1
H2
F13
Wood Parts
1 x
Side Roof 1 x 4 x 68"
OR14
1 x
Wall Support 1 x 4 x 38-1/4"
F14
T- Nut
15-3/4"
4 x
H2
4 x
PB1
Note: Hole
left open
H2
F14
F17
F13
PB1
Hardware
1/4 x 2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
1/4 x 3/4" Pan Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
29
OR14
PB1
Advertisement
