Advertisement
Step 14: Front Frame Assembly
Hex Bolt Assembly
Lock
Washer
Flat
He x
Washer
Bolt
A: Attach (OR2) Front Divider to (F12) Floor Front with 1 (H2) 1/4 x 2" Hex Bolt (with lock washer, flat washer and
t-nut) and to (F15) Front Top using 1 (PB2) 1/4 x 1-1/4" Pan Bolt (with lock washer, flat washer and t-nut). Make
sure (OR2) Front Divider is flush to the bottom of (F12) Floor Front. (fig. 14.1) Keep bolts loose.
B: Make sure (F15) Front Top is square and then attach to both (F13) Posts using 4 (S7) #12 x 2" Pan Screws
(with 3/16" flat washers). (fig. 14.1)
C: Tighten all bolts.
Fig. 14.1
F13
Wood Parts
1 x
Front Divider 1 x 4 x 38"
OR2
1 x
Front Top 1 x 5 x 46-1/2"
F15
T- Nut
S7
PB2
F12
H2
Flush to bottom
1 x
H2
4 x
S7
1 x
PB2
OR2
Hardware
1/4 x 2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
#12 x 2" Pan Screw (with 3/16" flat wsher)
1/4 x 1-1/4" Pan Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
27
F15
S7
F13
Advertisement
