Big Backyard ORIANA A24656E Installation And Operating Instructions Manual page 19

Step 9: Attach Rock Wall to Fort
A: Place Rock Wall Assembly from Step 1 on (OR9) Floor Back, flush to the edge and 1/2" down from the top as
shown in 9.1, 9.2 & 9.3. Attach (OR1) Rock Rails to (OR9) Floor Back using 4 (S2) #8 x 1-1/2" Wood Screws as
shown in fig. 9.2 & 9.3.
B: Make sure the assembly is square then attach (F16) SW Ground to (OR1) Rock Rail using 2 (S2) #8 x 1-1/2"
Wood Screws. (fig. 9.4)
Fig. 9.1
Fig. 9.2
OR9
OR1
1/2"
Hardware
6 x #8 x 1-1/2" Wood Screw
S2
19
S2
Fig. 9.3
OR1
OR1
Fig. 9.4
F16
S2