Electric Connections - Cyclo Vac HD Series Owner's Manual

There should be an electric outlet within 1 meter (3 feet) of your unit. Once the
appliance is installed in a suitable location, connect your unit to an electric outlet
on a dedicated* grounded circuit. Do not use extension cords or modify the length
of your unit power cord.
DEDICATED* GROUNDED CIRCUIT
120 V / models 800 & 801: 15 A
220 V / 240 V models 850 & 851: 10 A
Your unit has a thermal safety device / circuit breaker to protect it against
any over voltage or electrical defect. If that protection should fail, contact your
authorized dealer.
*Please reserve a circuit breaker dedicated only to the connections for your unit.
If you find that installing your HD unit is too difficult, ask your service center
to install it for you. When in doubt, it is better to have the work done by a
professional and ensure that the unit is properly installed. Any installation that
does not comply with the specified norms could alter or invalidate the warranty.

Electric Connections

Installation
11