Unit Installation; Installation - Cyclo Vac HD Series Owner's Manual

Using the mounting plate provided with
your unit, secure it to the wall (figure 1).
The connections to the dust collector will
require some basic tools: a mitre box and
small saw or a pipe cutter (figure 2).
Contrary to all other connections in the
piping system (except connection between
the dust collector and piping system),
do not glue the last fitting to your unit.
Cyclo Vac units are equipped with an
adjustable air intake valve (figure 3),
which does not require glue. An air-tight
fit is obtained with the screw-type
adjustment on the fitting itself.

Unit Installation

Installation

figure 1
figure 2
figure 3
7