Installing The Usb Driver - Sony Handycam DCR-TRV730E Operating Instructions Manual

Viewing images using your
computer
Notes
•Operations are not guaranteed for either the
Windows or Macintosh environment if you
connect 2 or more USB equipment to a single
computer at the same time or when using a
hub.
•Depending on the type of USB equipment that
is used simultaneously, some equipment may
not operate.
•Operations are not guaranteed for all the
recommended computer environments
mentioned above.

Installing the USB driver

Before connecting your camcorder to your
computer, install the USB driver to the computer.
The USB driver is contained together with
application software for viewing images on a
CD-ROM which is supplied with your
camcorder.
For Windows 98/98SE/Me and
Windows 2000 users
(1) Turn on your computer and allow Windows
to load.
(2) Insert the supplied CD-ROM in the CD-ROM
drive of your computer. The application
software screen appears.
(3) Click "USB Driver Installation for Windows ®
98/98SE/Me and Windows ® 2000". USB
driver installation starts.
(4) Follow the on-screen messages to install the
USB driver.
(5) Connect the
with the USB connector on your computer
using the supplied USB cable.
(6) Insert a "Memory Stick" into your camcorder,
connect the AC power adaptor and set the
POWER switch to MEMORY.
"PC MODE" appears on the screen of your
camcorder. Your computer recognizes the
camcorder, and the Windows Add Hardware
Wizard starts.
166
(USB) jack on your camcorder
(1)
(2)
(3)

(4)
(5)
(6)
