Viewing images recorded on a
tape on your computer (Windows
Installing the USB driver
Before connecting your camcorder to your
computer, install the USB driver on the
computer. The USB driver is packaged together
with application software for viewing images on
the CD-ROM supplied with your camcorder.
Start the following operation without
connecting the USB cable to your
Connect the USB cable in step 8.
If the USB driver has been registered
incorrectly because your computer was
connected to your camcorder before
installation of the USB driver was complete,
reinstall the USB driver following the
procedure on page 118.
For Windows 98SE, Windows Me, Windows
2000 Professional, Windows XP users
If you are using Windows 2000 Professional or
Windows XP, log in with permission of
(1) Turn on your computer and allow Windows
(2) Insert the supplied CD-ROM into the CD-
ROM drive of your computer. The application
software screen appears.
(3) Move the cursor to "USB Driver" and click.
This starts USB driver installation.