Sony Handycam DCR-TRV730E Operating Instructions Manual page 112

Changing the menu settings
Icon/item
STILL SET
PIC MODE
QUALITY
IMAGESIZE
MOVIE SET
IMAGESIZE
REMAIN
PRINT MARK
PROTECT
Note on IMAGESIZE
If you set PIC MODE to MULTI SCRN, IMAGESIZE is automatically set to 640 × 480.
112
Mode Meaning
z SINGLE Not to record continuously
CONTINUOUS To record continuously (p. 137)
MULTI SCRN To record 9 images continuously (p. 137)
z SUPER FINE To record still images in the finest image
quality mode
FINE To record still images in the fine image quality
mode
STANDARD To record still images in the standard image
quality mode (p. 130)
z 1152 × 864 To record still images in 1152 × 864 size (p. 132)
640 × 480 To record still images in 640 × 480 size
z 320 × 240 To record moving pictures in 320 × 240 size (p. 132)
160 × 112 To record moving pictures in 160 × 112 size
z AUTO To display the remaining capacity of the
"Memory Stick" in the following cases:
• For 5 seconds after setting the POWER switch
to MEMORY
• For 5 seconds after inserting a "Memory
Stick" into your camcorder in MEMORY,
VCR mode
• When the capacity of the "Memory Stick" is
less than 1 minute in MEMORY mode
• For 5 seconds after completing a moving
picture recording
ON To always display the remaining capacity of the
"Memory Stick"
ON To write a print mark on the recorded still
images you want to print out later (p. 182)
z OFF To cancel print marks on still images
ON To protect selected images against accidental
erasure (p. 177)
z OFF Not to protect images
POWER
switch
MEMORY
VCR
MEMORY
MEMORY
VCR
MEMORY
VCR
MEMORY
VCR
MEMORY
VCR
MEMORY