Recording An Image From A Tape As A Still Image - Sony Handycam DCR-TRV730E Operating Instructions Manual

Recording an image
from a tape as a still
image
Your camcorder can read moving image data
recorded on a tape and record it as a still image
on a "Memory Stick."
Your camcorder can also take in moving image
data through the input connector and record it as
a still image on a "Memory Stick."
Before operation
Insert a recorded tape and a "Memory Stick" into
your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. The image recorded on the tape is
played back.
(3) Keep pressing PHOTO lightly until the image
from the tape freezes. "CAPTURE" appears
on the screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed
on the screen will be recorded on the
"Memory Stick". Recording is complete when
the bar scroll indicator disappears.
2
REW
142
PLAY FF
3
(1)
(2)
(3)
(4)
4
CAPTURE
N
1