Table of Contents
Advertisement
SECTION 2
Installation
2.1 General Guidelines
Outdoor installations: Ensure the cover is secured to the dome base with the machine screws provided and rubber seals.
•
Dome cover
Machine screw
Rubber seal
Dome base
Dome/window care: Handle the dome carefully to prevent scratching. If a scratch appears over the lens, adjust the dome
•
window to move the scratch away from the lens.
Keep dome cover and camera lens clean. To avoid smearing, do not expose the camera lens to a strong light source such as the
sun or spot lights.
CAUTION
Monitor impedance: Set the monitor impedance switch to 75 Ω.
•
Power supply: To avoid fire or shock hazard, use only a UL listed power supply.
•
2.2 Camera drop cable
Drop cable connectors / wires definitions:
Power: red sleeved connector; 12 Vdc / 24 Vac non-polarized
•
HD-SDI: BNC connector
•
Pigtail wires:
•
RS-485(+): blue wire
—
RS-485(-): green wire
—
2 Megapixel HDcctv Indoor/Outdoor IR Dome Cameras
SECTION 2: INSTALLATION
5
Advertisement
Table of Contents
