SECTION 3: SOFTWARE SETUP
SMART IR : OFF / ON. NOTE: SMART IR function only works with IR Smart Model.
•
THRS : Set-up Smart IR turns on point. When you level up the value, Smart IR turns on in a low light condition.
—
AREA : Set up areas to control Smart IR function. When BLC mode is on, Smart IR area is following BLC area.
—
POS-X : Adjust the window X-Axis position
—
POS-Y : Adjust the window Y-Axis position
—
SIZ-X : Adjust the window X-Axis size
—
SIZ-Y : Adjust the window Y-Axis size
—
IR COMP: Compensate when IR fluctuation occurs. Objects in front of camera must be at least 1 foot away from
—
camera.
3.4 WHITE BALANCE
AWB : Select WHITE BALANCE mode. AUTO / PRESET / MANUAL / INDOOR / OUTDOOR
•
AUTO : Automatically adjusts color according to the lighting.
—
PRESET : It is a fixed white balance mode that may be automatically readjusted only by pressing PRESET
—
MANUAL : You can change WB as changing "RED GAIN" and "BLUE GAIN" in manual mode.
—
RED GAIN : Adjust R gain value 0 ~ 20
»
BLUE GAIN : Adjust B gain value 0 ~ 20
»
INDOOR : Set color temperature to be Indoor light (3700 K)
—
OUTDOOR : Set color temperature to be Outdoor light (5100 K)
—
CHROMA : Adjust CHROMA gain value 0 ~ 20 steps
•
12