2.4 BLK-HDM1IR camera
mounting
1.
Connect the dome base to the mounting surface using four
(4) screws.
2.
Route the power and video cables to the camera location
and attach them to the camera drop cable (see General
guidelines above).
2.5 Camera adjustments
1.
Attach a video setup monitor to the yellow CVBS (yellow) connector on the drop cable, the RCA connector on the camera PC
board, or setup a remote monitor for viewing video from the camera.
2.
Power on the camera and video monitor.
3.
While observing video from the camera, adjust the gimbal pan/tilt/horizon to aim the camera in the preferred direction.
Pan adjustment (rotate gimbal)
2 Megapixel HDcctv Indoor/Outdoor IR Dome Cameras
SECTION 2: INSTALLATION
Tilt adjustment
7