Removing The Selector Knob Shaft; Removing The Selector Knob; Removing The Loading Door; Disassembling The Loading Door - GE DSXH47EG Technical Service Manual

3. Lift the shaft out of the control.

Removing the selector knob shaft:

1. Disconnect dryer from the electrical supply, turn
the SELECTOR knob to the 12 o'clock position and
remove the control board.
2. Lift the shaft out of the control.

Removing the selector knob:

1. Disconnect dryer from the electrical supply and
remove the control board.
2. Using pliers, squeeze the lock rim of the knob shaft
and pull the knob out the front.

Removing the loading door:

1. Open the door and while supporting the door,
remove the (4) screws (2 from each hinge) holding
the door to the hinges.

Disassembling the loading door:

1. Remove the door from the dryer.
33