Control Panel Components; Cycle Select Knob; Knob Retainer; Knob Retainer Removal - GE GFDR485GF Technical Service Manual

Cycle Select Knob

Knob Retainer

Cycle Select Knob
Front View
Knob Retainer
Front View

Knob Retainer Removal

remove.

Control Panel Components

Control Panel Exploded View

Control Panel

Rear View
Rear View
Control Board
Button Trees
Control Panel
Front View
The control panel is a plastic housing with graphics.
The button trees, knob, knob retainer and UI board
must be obtained separately.

Control Panel Removal

1. Remove the cycle select knob by pulling it for-
ward.
2. Remove the knob retainer by pulling it forward.
3. Remove the T-20 control panel screw located
behind the knob retainer.
4. Lift the control panel straight up and tilt it for-
ward.
5. Remove all main board wire harness connec-
tions and remove the control panel.
20
5/16" hex
Rear View