Point Correction - Epson EB-Z8455WU User Manual

Settings for Multiple Projectors
• We recommend setting the focus, zoom, and lens shift at least 30
q
minutes after you start the projection, because images are not stable
right after turning on the projector.
• The Test Pattern can be displayed to adjust the projection status
without connecting video equipment. s
• When projecting from multiple projectors, the correction is easier if
you use the image in dot by dot format, that can be displayed
without being enlarged or reduced.

Point Correction

Corrects slight distortion which occurs partially, or adjusts the screen
position in an overlapping area when projecting from multiple projectors.
Divides the projected image by the grid and corrects the distortion by
moving the point of intersection from side to side and up and down.
Procedure
A
During projection, press the [Menu] button. Select Settings
menu - "Geometric Correction" and then press the [Enter]
button. "Using the Configuration Menu"
s
Remote Control
p.137
B
C
D
E
F
p.47
Select "Point Correction", and then press the [Enter] button.
Select "Grid Size", and then press the [Enter] button.
Select one of "3x3", "5x5", or "9x9", and then press the [Enter]
button.
Press the [Esc] button to return to the previous screen.
Select "Start Adjustments", and then press the [Enter] button.
According to the value selected in Grid Size, the point selection
screen is displayed on the projected image.
You can change the color of the guide on Pattern Color.
q
153