Snmp Menu - Epson EB-Z8455WU User Manual

Network Menu

SNMP menu

To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network
administrator.
Sub Menu
SNMP
Trap IP Address 1/Trap IP
Address 2
Community Name
Set this parameter to On when using SNMP
When SNMP is set to On, you can set up to two IP addresses as SNMP trap notification destinations.
You can input a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Set the community name of SNMP. You can enter up to 32 single-byte alphanumeric characters.
Function
g
to monitor the projector.
75