Setting The Remote Control Id; Adjusting The Position Of The Projected Image - Epson EB-Z8455WU User Manual

Settings for Multiple Projectors
B
During projection, while holding the [ID] button, press the
[Help] button.
Remote Control
When you press the buttons, the current Projector ID is displayed on
the projection screen. It disappears in about three seconds.

Setting the remote control ID

Procedure
A
Set the remote control ID switch to On.
B
While holding the [ID] button, press a number button to select
a number to match the ID of the projector you want to
operate. "Checking the Projector ID"
s
Remote Control
Once this setting has been made, the projector that can be operated by the
remote control is limited.
The remote control ID setting is saved in the remote control. Even if
q
the remote control batteries are removed to replace them and so on,
the stored ID setting is retained. However, if the batteries are left out
for a long time, it is reset to the default value (ID0).

Adjusting the Position of the Projected Image

Adjust the position of the projected image, starting from the adjustments
that have larger corrections.
1. Projector's position (angle) s
2. Lens shift/Zoom s p.138
3. Geometric Correction
• Quick Corner
p.140
s
• Point Correction
p.153
s
p.151
p.130
152