Saving A User's Logo - Epson EB-Z8455WU User Manual

Saving a User's Logo

You can save the image that is currently being projected as a User's Logo.
The saved user's logo can be used as the display image when there is no
video signal input or during starting up.
Once a User's Logo has been saved, the logo cannot be returned to the
q
factory default.
Procedure
A
Project the image you want to use as the User's Logo, and then
press the [Menu] button.
Using the Remote Control
B
Select Extended - "User's Logo" from the configuration menu.
"Using the Configuration Menu"
s
Check the buttons you can use and the operations they perform in
the guide under the menu.
Using the Control Panel
p.47
• If User's Logo Protect from Password Protect is set to On, a
q
message is displayed and the user's logo cannot be changed. You can
make changes after setting User's Logo Protect to Off.
p.38
s
• If User's Logo is selected when keystone, E-Zoom, or Aspect are
being performed, the function currently being performed is
cancelled.
C
When "Choose this image as the User's Logo?" is displayed,
select "Yes".
When you press the [Enter] button on the Remote Control or the
q
Control panel, the screen size may change according to the signal as it
changes to the resolution of the image signal.
36