Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point
When connecting using the Push Button Method, follow the steps
given below.
Go to "Making a connection using the PIN Code Method" when
connecting using the PIN Code Method.
Making a connection using the push button method
Procedure
A
Select "Push Button Method".
The "Push Button Method" screen is displayed.
p.127
s
B
Press the [Enter] button on the projector's control panel when
prompted by the screen.
Then, the "Push Button Method" screen is displayed.
C
Press the button on the access point when prompted by the
screen.
This completes the setup.
D
Press the [Enter] button or the [Esc] button.
It returns to the Wireless LAN menu screen.
E
Select "Setup complete" - "Yes."
126