Adjusting the Projected Image
Displaying a Test Pattern
A test pattern can be displayed to adjust the projection status without
connecting video equipment. This is useful when installing a projector.
If the [User] button on the remote control is set to Test Pattern, the
q
test pattern will be displayed when the [User] button is pressed. (The
default setting is Test Pattern.)
Procedure
A
During projection, press the [Menu] button. Select Settings -
"Test Pattern", then press the [Enter] button.
Using the Remote Control
Using the Control Panel
B
Press the [
] button on the remote control in the [
h
or press the [Enter] button on the control panel to switch the
test pattern.
To display the previous image, press the [
control in the [
] direction.
l
Using the Remote Control
The following adjustments can be made while the test pattern is being
displayed.
Top Menu
Image menu
] direction
r
] button on the remote
h
Using the Control Panel
Sub Menu/Items
Color Mode s
p.28
Abs. Color Temp.
Advanced
- Gamma
*1
p.146
s
- RGB
- RGBCMY s
p.146
Auto Iris
137