External Components; Ayback From External Components - Kenwood K-821DV Instruction Manual

External Components

This section explains how to connect external components
to the system and play back tracks.
64
K-821DV
Playback from External Components
Connect the external component to the system as described in <Connecting
Other Accessories (Commercially Available Units)> (P.14, 15).
When connecting external components, always turn this system and the external com-
ponents off beforehand.
Also refer to the instruction manual that comes with the external component being
connected.
1 1
Press the [D-IN] key when playback is performed from a de-
vice connected to the [DIGITAL IN (OPTICAL) ] terminal, while
press the [AUX] key when playback is made performed from
a device connected to the [AUX IN] terminal.
2 2
Begin playback on the connected external component.
Perform the required operation on the connected external component to start
playback.
3 3
Adjust the volume level.
You can switch the display contents by pressing the [DISPLAY] key.
D-IN
D-IN/ Audio signal format
AUX
AUX
The input audio signal formats are
displayed.
The system will play PCM, Dolby
Digital, and dts signals.
Day/Clock
Day/Clock