Kenwood K-821DV Instruction Manual page 12

Connecting the System
Connecting TV Monitor
Using video cable
Connect the video input terminal on a TV
monitor to the [VIDEO MONITOR OUT] ter-
minal on the rear panel of the main unit us-
ing the video cord supplied with the system.
Using HDMI cable
Connect the HDMI terminal on a TV monitor
to the [HDMI MONITOR OUT] terminal on
the rear panel of the main unit.
An HDMI/DVI converter cable is necessary to connect a TV monitor with a DVI input terminal. The TV monitor also
needs to be compatible with HDCP (High-bandwidth Digital Contents Protection). Note that the video may be unable
to be monitored depending on the combined components.
Use an HDMI-certifi ed category 2 cable (High Speed HDMI™ Cable) for the connection.
If the video and/or audio are not output normally, turn all of the connected components off then on, and try again.
To select TV format
In case of using video cable
1. Press the [ ] key to remove the disc from the unit, then close the tray.
2. Press and hold the
format (PAL/NTSC).
PAL
In case of using HDMI cable
A format is automatically selected for your TV format.
• During HDMI cable connection, the format of the composite video output is adjusted to the
connected TV monitor.
HDMI, the HDMI logo and High-Defi nition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
12
K-821DV
R
D.AUDIO
IN
SUB L
WOOFER
R L
PRE OUT
REC OUT PLAY IN
DIGITAL OUT
SPEAKERS
R
D.AUDIO
IN
SUB
L
WOOFER
R L
PRE OUT
REC OUT PLAY IN
DIGITAL OUT
SPEAKERS
[ ] key on the remote control for more than 2 seconds to be able to select a TV
NTSC
Video input
TV monitor
HDMI MONITOR IN
TV monitor