Kenwood K-821DV Instruction Manual page 84

Setting the Timer
84
K-821DV K-821DV
12 12
Press the power [K] key to turn the power OFF.
The [STANDBY/TIMER] indicator on the main unit lights orange.
If the indicator lights red, set the clock to the correct time.
To turn a timer off or on
When the system is turned on, press the [TIMER] key.
The setting changes each time you press the [TIMER] key.
1 lit
PROG. 1 on
1 2 unlit
Timer off
The [STANDBY/TIMER] indicator will light red if there was a power
failure or the system was unplugged from the wall outlet for some
time. If this happens, set the system clock to the correct time again.
(See P.86)
To modify the program settings, reconfi gure the timer settings from the begin-
ning.
When the system is in Standby mode, you can confi rm the timer setting (on or
off ) for 5 seconds by pressing the [F] key on the remote control.
2 lit
PROG. 2 on
1 2 lit
PROG. 1 and 2 on