Kenwood K-821DV Instruction Manual page 94

System Settings
Setting item
DOWN MIX
D.RANGE COMPRESSION
HDMI AUDIO OUT
Relation between DIGITAL AUDIO OUT settings and output signals Relation between DIGITAL AUDIO OUT settings and output signals
Type of disc/fi le to play
DVD Video with 48kHz,
16/20/24-bit linear PCM
DVD Video with 96kHz
linear PCM
DTS DVD Video/DVD
Audio
Dolby Digital DVD Video
CD/VCD/SVCD
DTS CD
MP3/WMA/WAV/MPEG1/
MPEG2 fi les
About the [DIGITAL OUT] terminal: 20 or 24 bit signal may be output for some DVDs that have no copyright
protection setting.
94
K-821DV K-821DV
Description
Select the signal based on the external device connected to the [DIGITAL OUT] terminal of
the system. This setting is available when "PCM ONLY" is selected for "DIGITAL AUDIO OUT".
DOLBY SURROUND:
Used for devices that have a built-in Dolby Pro Logic decoder.
STEREO:
Used for other devices.
This function corrects the diff erence in quality between large and small sounds played at
low volume. (This function is valid for DVDs recorded in Dolby Digital format.)
AUTO:
D.RANGE COMPRESSION automatically works when needed.
ON:
D.RANGE COMPRESSION always works.
You can select whether or not the audio signal from the [HDMI MONITOR OUT] terminal is
output.
ON: The audio signal from the [HDMI MONITOR OUT] is output.
OFF: The audio signal from the [HDMI MONITOR OUT] is not output.
NOTE
Depending on the connected TV, when "HDMI AUDIO OUT" is set to "ON", only PCM sig-
nals can be output via an HDMI cable.
DIGITAL AUDIO OUT Settings
STREAM/PCM
Linear PCM with 48kHz, 16-bit stereo
DTS bitsteam
Dolby Digital bitstream
Linear PCM with 44.1kHz, 16-bit stereo
Linear PCM with 48kHz, 16 bit
DTS bitstream
Linear PCM with 32/44.1/48kHz, 16 bit
DOLBY DIGITAL/PCM
Linear PCM with 48kHz, 16-bit stereo
Linear PCM with 48kHz, 16-bit
Linear PCM with 44.1kHz, 16 bit
PCM only
stereo