External Components
This section explains how to connect external components to the system and play back tracks.
60
C-707I
Playback from External Components
Connect the external component to the system as described in
<Connecting Other (Commercially Available) Devices> (page 17).
When connecting external components, always turn this system and the external
components off beforehand.
Also refer to the instruction manual that comes with the external component being
connected.
1
1
Connect the external component to the [AUX IN] terminal
on the back panel of the main unit.
2
2
Select AUX as the source.
Press the [AUX] key.
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
AUX
3
3
Begin playback on the connected external component.
Perform the required operation on the connected external component to start
playback.
Audio OUT
D. AUDIO