Using The Remote Control - Kenwood K-821DV Instruction Manual

Using the remote control

After plugging the main unit into an AC
wall outlet, press the power [K] key on
the remote control unit to turn the system
on.
After the system powers up, press the key
for the function you want to use.
Point the remote control at the remote
sensor when using it.
The remote control may not operate
correctly if direct sunlight or light from
a high-frequency fluorescent lamp
(such as an inverter type) is shining
on the remote sensor. If this happens,
move the system to a diff erent location
to avoid this type of malfunction.
Loading the remote control batteries
1 Remove the
battery cover.
The batteries supplied with the system are for operational testing and may
last only for a short time.
When replacing the batteries, always load 2 new batteries.
Do not leave the battery near fi re or under direct sunlight. A fi re, explosion or excessive heat
CAUTION
generation may result.
Approx.
°
30
2 Load the AAA-size batteries
supplied with the system.
Check the polarity of the
batteries (UV) when
loading them.
Component Names and Functions
Approx.
6 m
Approx.
°
30
3 Close the bat-
tery cover.
English
19