Setting The System Clock Sound; Setting The System Clock - Kenwood K-821DV Instruction Manual

Setting the System Clock

Set the system clock to the correct time.If the system clock time setting is not cor-
rect, the Program Timer will not start playback at the correct time.
86
K-821DV
1 1
Press the [MODE] key.
2 2
Select "TIME ADJUST".
Press the [C] or [D] key.
3 3
Set the day of the week.
Press the [A] or [B] key.
4 4
Set the time.
Use the [A] or [B] key to set the
"hour".
Use the [A] or [B] key to set the
"minute".
The currently set day of the week and time are displayed.
If you make a mistake, repeat the procedure from the beginning.
If there is a power failure or the system is unplugged from the wall outlet for
some time, set the time again.
Pressing the [ F] key on the remote control while the system is in the Standby
mode will display the time for 5 seconds.
Time display diff ers (24 Hour clock display or AM/ PM display) according to area.
Press the [ENTER] key.
Press the [ENTER] key.
Press the [ENTER] key.
Press the [ENTER] key.