D.audio; Playing From A Digital Audio Player - Kenwood K-821DV Instruction Manual

D.AUDIO

You can connect a Kenwood digital audio player (referred to hereafter simply as "digital audio player") to
the system and use it to play tracks.
66
K-821DV

Playing from a Digital Audio Player

Use this procedure to connect a digital audio player to the system and play tracks.
Always turn this system and the digital audio player off before connecting the digital
audio player.
Also refer to the instruction manual that comes with the digital audio player you are
connection.
Connecting the digital audio player using the dedicated cable PNC-150 allows you to
operate the digital audio player using the main unit or the remote control.
Compatible Kenwood digital audio players
HDD audio player
HD20GA7
1 1
Connect the digital audio player to the [D.AUDIO IN] termi-
nal on the rear panel of the main unit.
2 2
Turn on the digital audio player.
3 3
Press the [D.AUDIOE] key to begin playback.
Simply pressing the [D.AUDIOE] key turns on the system and begins play-
back.
If the digital audio player is not connected using the dedicated cable PNC-150,
use the controls on the connected digital audio player.
If you use the dedicated cable for the connection, the volume and sound quality
settings on the digital audio player are disabled.
When you have fi nished using the digital audio player, disconnect the player's
connection cable from the [D.AUDIO IN] terminal.
(Europe and Australia only)
Memory audio player
M1GC7, MGR-A7

D.AUDIO

IN
R
D.AUDIO
IN
SUB
L
WOOFER
R L
PRE OUT
REC OUT PLAY IN
DIGITAL OUT
SPEAKERS