Region Selection; Firmware Upgrades - Sena NAUTITALK N2R Manual

8 CONFIGURATION SETTING AND FIRMWARE UPDATES
8.1.5 Voice Prompt (Default: Enabled)
While some Voice Prompts may be disabled in the software
configuration settings, the following voice prompts are always on:
- Battery level indicator
- Speed dial
- FM radio functions
- Mesh Intercom
8.1.6 RDS AF Setting (Default: Disabled)
A radio station with more than one frequency can be used by enabling
the Radio Data System (RDS) Alternative Frequency (AF) Setting.
This setting allows a receiver to re-tune to the second frequency
location when the first signal becomes too weak.
8.1.7 FM Station Guide (Default: Enabled)
When FM Station Guide is enabled, FM station frequencies are given
by voice prompts as you select preset stations.

8.1.8 Region Selection

When using the region setting, you can optimize the seek function to
avoid unnecessary frequency ranges, allowing you to select the proper
FM frequency range for your location.
Region
Worldwide
North America,
South America and Australia
Asia and Europe
Japan

8.1.9 Firmware Upgrades

You can upgrade the firmware using the Sena Device Manager by
connecting the USB Power & Data Cable (USB-C) to your PC.
Download the Sena Device Manager at sena.com.
Frequency range
76.0 ~ 108.0 MHz
87.5 ~ 107.9 MHz
87.5 ~ 108.0 MHz
76.0 ~ 95.0 MHz
NAUTITALK N2R Yaching Headsets™ | 19
Step
± 100 kHz
± 200 kHz
± 100 kHz
± 100 kHz